Target公司全球遵约计划(COC介绍)
来源:中国验厂网 发布时间:2013-1-28
Target公司全球遵约计划(COC介绍)
Target Global Compliance Program
Target公司全球遵约计划
Standards of Vendor Engagement
Target供应商合约规范
Safe and Healthy Workplace
安全与健康的工作环境
A safe and Healthy workplace is essential for the employees working in
your factories. The factory needs to provide the following to ensure the
employees can quickly react in case of emergency:
健康与安全的工作环境对于你们工厂的雇员来说是必不可少的. 为确保您的雇员在紧急情况下能够迅速作出反应, 工厂需要提供以下便利/措施:
1. Enough fire extinguishers and/or hydrants(with hoses) for the size of
the factory and in accordance with local laws.
相对于工厂规模足够的灭火器和/或消防栓(带水管), 且符合当地法律规定.
2. Adequate emergency lighting(with a battery back-up) should be installed
throughout the factory.
整个工厂需安装有足够的紧急照明系统(带有备用电池).
3. Adequate emergency exits. Best practice is to ensure every employee had
access to at least two exits.
充足的紧急出口. 最佳做法是确保每名雇员都可以享用两个紧急出口.
***Exits should be unblocked(from the inside), unobstructed and well
marked. The exit door should push to open, not pull to open.
***紧急出口需保持畅通, 不得有任何阻挡/阻塞, 且明显标示. 紧急出口门必须是"推"开, 而不是"拉"开.
4. All employees should have basic training on how to use the fire
extinguishers/hydrants, location of the emergency exits and first-aid
training.
所有雇员需接受以下基本培训: 如何使用灭火器/消防栓, 紧急出口位置及急救培训.
5. Personal Protective Equipment such as eyewear, ear-plugs and face masks
should be made available to employees when applicable.
当情况需要时, 需提供个人防护设备如:眼罩, 耳塞, 面具等.
***The employees should also be trained in the correct use and
educated on why they should use personal protective equipment.
***需要对雇员如何正确使用个人防护设备进行培训, 以及为什么他们需要使用个人防护设备.
6. If dormitories are provided, they must be in cmpliance with all
applicable laws in regards to fire&safety, room size and number of
occipants per room.
如果工厂提供住宿(宿舍), 必须符合与消防/安全, 房间面积及每间人数等所有适用的法律要求.
No Forced or Compulsory Labor
不使用强迫/强制劳动力
***Target has a "zero tolerence" policy towards the use of forced or
compulsory labor.
***Target对于强迫/强制劳动力的使用采取"零容忍"政策.
1. Employees must be able to decline overtime without penalty (financial
or other).
雇员必须可以不受任何惩罚的(财务或其它形式的)拒绝加班.
2. Employees should not be subject to large financial emplyment deposits
to begin or retain employment.
不得对雇员收取入厂押金或雇佣押金.
3. No prison labor may be used. Is is illegal to import products produced
by prison labor in the the United States per U.S. Customs and Border
Protection.
不得使用监狱劳动力. 根据美国海关与边防局,进口监狱劳动力生产的产品进入美国是违法的.
Fair Disciplinary Practices
公平惩戒措施
Workers should not be unfairly punished for things such as declining
overtime, being tardy, producing defective goods, or poor production. All
factories shold have written rules regarding disclipnary procedures and
those policies should be communicated to the workers.
工人不得对如以下行为受到任何惩罚: 拒绝加班, 迟到, 做出次品或较差的生产. 所有工厂对于惩戒措施/程序需要书面规则/政策,
且这些规则/政策需传达于工人.
1. Disciplinary practices must be in accordance to applicable local laws.
惩戒措施必须符合所适用的当地法律.
2. Target ha a "zero tolerence" policy towards corporal punishment.
***Target对于雇员体罚采取"零容忍"政策.
3. Corporal punishment is defined as "punishment inflicted on a person's
body"
"体罚"定义为"对一个人的身体采取的惩罚".
No Discrimination
无歧视
***Workers should be hired based on qualifications, not gender, race,
personal characteristics or beliefss.
***工人的雇用需根据其资格, 而不是性别, 种族, 个人特征或信仰.
1. All employees should be treated with respect. This includes workers
imported from another country.
对于所有雇员都需要尊重以待. 包括他国雇员.
2. Pregnacy/HIV testing should not be conducted at time of hire unless
required by local law.
除非有当地法律规定, 雇用时不得进行怀孕/艾滋病毒检测.
Reasonable Working Hours and Overtime
合理的工作时间与加班时间
***Working hours should not exceed local laws
***工作时间不得超过当地法律的规定
1. Target establishes a maximum work week(including overtime) of 60 hours.
If local law specifies a work week(including overtime) of less than 60
hours, local law should be followed.
Target接受的每周最长工作时间为60小时(包括加班时间在内). 如果当地法律规定的周最长工作时间(包括加班时间在内)小于60小时,
以当地法律为准.
2. Employees should receive one day of rest per week(one day off in seven
days).
雇员每周需有至少一天休息(一周七天至少休息一天).
3. Employees must be able to decline overtime without penalty(financial or
other).
雇员必须能够不受任何惩罚的拒绝加班(财务的或其他任何惩罚).
4. Vendors should know and follow the local law for each country of
production.
供应商必须知道且遵守进行生产的每个国家当地的法律.
Fair Wages
公平工资
1. Employees must be paid for all hours worked. Use of a time clock or
scan-card system is required to tracking employee's hours(both regular
hours and overtime).
必须支付雇员所有工作时数. 必须使用考勤钟或刷卡考勤系统来记录雇员工作时数(正常工作时数和加班时数)---***Target不接受手工考勤表.
2. Local laws regarding wages and overtime compensation must be followed.
必须遵守当地法律关于工资或加班补偿的规定.
3. Employees should receive additional compensation for overtime even if
the particular country does not have overtime wage laws.
即使某个国家未有加班工资的法律, 雇员也应当得到加班的额外补偿.
4. Employees shgould be paid in a timely manner.
雇员工资需按时支付.
5. Any payroll deductions must be in accordance with local laws.
任何工资中扣除项目需符合当地法律规定.
6. Employees should not be held respnsible for damaged goods.
雇员不该对毁损货物负有责任.
No Child Labor
不得雇佣童工
***Child is defined by Target as being below the local minimum age or 14,
whichever is greater.
***Target对童工的定义: 14岁以下或当地法律规定的最小年龄以下-二者哪个大适用哪个.
1. Target has a "zero tolerence" policy towards the use if child labor. It
is Target's Policy to not accept produced by child labor.
Target对于雇用童工采取"零容忍"政策. Target政策规定不接受童工生产的产品.
2. Apprenticeship programs must be fully documented and in compliance with
applicable local laws.
学徒工计划必须有书面的实施制度和程序, 且符合当地法律规定.
3. The factory must maintain complete and accurate personnel records for
all employees, including "temporary" or "seasonal" employees
工厂必须保存完整且准确的所有雇员人事纪录, 包括"临时工"与"季节工".
4. Vendors should know and follow the local law for each country of
production.
供应商必须知道且遵守进行生产的每个国家当地的法律.
Country of Origin
原产国
1. Target will not accept any merchandise that was illegally tran-shipped
into the United States per U.S. Customs and Border Protection.
根据美国海关与边防局, Target不接受任何通过非法转运进入美国的货物.
2. Target has a "zero telerence" policy towards the misrepresentation of
Country of Origin.
Target对于虚假的原产国的声明采取"零容忍"政策.
3. Per U.S Customs and Border Protection, illegal transhipment is a false
declarition if infirmation given to circumvent existing United States
trade laws for the purpose of avoiding quotas, embargoes or
prohibinitions, or to obtain preferential duty treatment.
根据美国海关与边防局, 非法转运是出于规避现有美国法律关于配额,禁运或禁令或获取关税优惠待遇而进行的虚假原产地信息声明.
4. The vendor/factory should maintain all production and import/export
records for a period of five years as required by U.S. Customs and Border
Protection.
根据美国海关与边防局要求, 供应商/工厂应该对所有生产及进/出口记录保存五年.
***These records should remain at the factory for a minimum of 1 year and
be provided upon request within 72 hours.
***这些记录应该在工厂至少保留一年, 而且, 如果要求提供应该在72小时内拿出.
Zero Tolerence/Severe Violation
零容忍政策/严重违犯
***If any of the below listed 4 standards are violated at any point, the
factory will be made non-compliant and will not be allowed to produce
Target owned brand products for up to 3 years:
***任何时间对于以下四条标准中的任何一条的违犯, 工厂必须被定为"不遵约", 且3年内不得生产Target自有品牌产品:
***If the factory did produce Target products Target could not accept this
merchandise.
***如果工厂在做Target产品, Target将不接受这些商品
1. No Child Labor
不得雇用/使用童工
2. No Forced or Compulsory Labor
不得使用强迫/强制劳动力
3. Fair Disciplinary Practices and No Corporal Punishment
公平惩戒措施且不得使用体罚
4. Country of Origin/Illegally Transshipped Goods
原产国/不得进行非法转运货物
Target Global Compliance Audit Process
Target 全球遵约(人权)验厂程序
Compliance audits are conducted to ensure all vendors and their factories
meet the requirements of local laws, federal regulations, U.S Customs
requirements and Target's policies.
全球遵约(人权)验厂程序被执行以确保所有供应商及其工厂符合以下标准: 当地法律的要求, 美国联邦政府规章, 美国海关要求及Target公司政策.
***Compliance Audits are:
***全球遵约(人权)验厂是:
1. Mandatory-All registered vendors and factories are required to
participate and are subject to compliance audits.
强制性的-所有Target已注册供应商及其工厂必须参与且必须接受全球遵约验厂.
2. Unannounced-No notification is given to weither the vendor or factory
in advance of the compliance audit. This allows us to see the factory on a
typical day.
不事先通知的(突击)-无论是供应商还是工厂在全球遵约验厂前都不会得到事先通知. 这样可以使我们在一个具有代表性一天来了解工厂.
3. Verification of Global Compliance registration informatin-Information
in BPM, including address information and contact information must be
accurate and up-to-date. U.S. Customs and Border Protection required
Target to know where our products are being produced.
对于全球遵约注册信息的查证-对于供应商在Target"生意伙伴管理系统"注册的信息, 包括工厂地址及联系信息必须准确且最新.
美国海关与边防局要求Target了解我们的产品是在哪里生产的.
4. Factory has up to three chances to become compliant with local laws and
Target Standards of Vendor Engagement. Vendor will be required to pay for
the third audit if a third audit is necessary.
每个工厂至多有三次机会通过全球遵约验厂(遵从当地法律规定与Target供应商合约准则). 如果必须进行第三次(最后一次机会)验厂,
工厂或供应商需支付第三次验厂费用.
Unannouced Factory Audit consists of 7 parts:
突击验厂包含以下7项内容:
1. Opening Meeting-Auditor will expain the intent of visit and the audit
process.
开始会议-审验员解释验厂目的及验厂程序
2. Factory tour-General Walkthrough of the factory and dorms(if
applicable)
工厂走览-对于厂区及宿舍等进行一般性走查
3. Employee interviews-Confidential, conducted one-to-one of in small
groups.
雇员面谈-秘密的, 一对一或分小组进行面谈
4. Factory management interview-Review hiring process, factory rules, work
schedules, and other procedures used by factory management.
工厂管理层面谈-评估雇佣程序, 工厂规章制度, 工作计划, 以及工厂管理的其它程序.
5. Country of Origina review-Review production records and shipping
records.
原产国审验-检查生产记录和运输记录.
6. Closing meeting-Review any findings found during the audit with factory
management. This includes detailing how to correct the issue(s) and
negotiate the "correct by" date. The audit recap is signed by both the
auditor and factory management and a copy is left with the factory.
结束会议-与工厂管理层评论审验期间发现的问题. 包括详细的如何改正 发现的问题以及协议改正日期.
然后一份"验厂概要"需要验厂员和工厂管理人员共同签署, 且留一份拷贝于工厂.
Types of Audits:
验厂类型
First Round Audit:
首轮验厂
1. This is Target initial audit of a factory to determine if the factory
is acceptable.
这是Target进行的首次验厂,以决定该工厂是否可以接受.
2. Target pays for the first and second audits. After the second audit, if
a follow-up audit is required the vendor will be charged per additional
audit.
Target支付第一次和第二次验厂费用. 第二次以后, 如果需要进行跟踪验厂, 工厂或供应商需支付本次额外验厂费用.
3. There are a maximum of three audits
验厂最多有三次机会.
 
Examples of Findings found during an audit
验厂结果举例
Most common issues found in a factory during a compliance audit
验厂过程中发现的最常见的问题:
1. Fire Safety, Exits and Equipment
消防安全, 紧急出口及设备
2. First Aid equipment not properly supplied
未合理提供急救设备
3. Missing or incomplete personnel records
缺少或不完整的人事记录
4. Payroll and time keeping system not being properly used
未合理使用工资帐及工时记录系统
5. Lack of proper Country of Origin documentation-records must be
maintained for 5 years per U.S. Customs and Border Protection
缺少合理的原产国记录档案-根据美国海关与边防局, 记录档案需保存5年
6. Wages-regular and overtime not being properly paid
工资-未合理支付正常工资以及加班工资
Audit finds are reviewed with factory management at the end of the audit
验厂结束, 验厂结果与工厂管理层评阅
Factory agrees to a specified time frame as to when issues will be
corrected
工厂同意改正发现的问题的具体时间.
Note: A factory will be unregistered and assigned Non-compliant status if
one or more of the following is found during the audit:
注: 如果审验期间发现以下一个或多个问题, 该工厂将被解除注册且认定为"不合约(不合格)"状态.
The following are considred Severe Violations and will result in
non-compliance factory status at any point in time not just after a 3rd
audit. The factory would then not be able to be used for up to 3 years.
以下被认为是"严重违犯"并且在任何时间内(不只是第三次验厂之后)会使该工厂被认定为"不合约(不合格)"状态. 且三年内不得用该工厂.
1. Child Labor 使用童工
2. Forced Labor 强迫劳动力
3. Corporal Punishment 体罚
4. Illegal Transshipment 非法转运
or 或
1. Two denied audit
两次拒绝验厂
2. 3rd audit of the first round of audits
第一轮验厂的第三次验厂未通过
3.  2nd sustainability audit
后续验厂的第二次未通过
Global Compliance will assess financial penalties for the following:
全球遵约(人权)验厂会对以下行为进行评定财务惩罚:
1. Denied Audits-Auditor arrives to the factory and is declinded access to
conduct a factory audit.
拒绝验厂-验厂员到达工厂但被拒绝进入工厂执行验厂
2. Inaccurate Audits-The factory name/address information is not correct
or up-to-date in BPM
不准确信息-工厂名称/地址等信息不准确或未及时更新
3. Unregistered Factory-Failure to register subcontractor/factories that
are producing Target owned brand product(including subcontractors)
未注册工厂-未注册生产Target自有品牌产品的分包商/工厂.
 
上一篇:TCPS工厂评估前工厂需准备的文件
下一篇:Target商业行为守则检查细节解释

如果您正在面临【验厂的困惑】--马上联系我们吧! QQ:2361231818
电话垂询:0574-27619833、15950051808免费电话咨询、电话指导、现场评估。

Target验厂的相关文章:

●  塔吉特验厂(Target验厂)常见问题中英文

●  Target验厂基本程序

●  Target/AMC验厂清单

联系我们

苏州国涵企业管理咨询有限公司

——中国验厂专家与先行者!

苏州市姑苏区人民路3188号10幢1412室

24小时服务热线:15950051808

电话:0512-67663325

QQ:2395015289

宁波国涵公司

电话:15356462660

义乌办事处

电话:13676840710

温州办事处

电话:17867950759

山东办事处

电话:17085395338

东莞办事处

电话:18898368423

在线客服系统